Rubber Products Visual Inspection System
RUVIS

Rubber Product Visual Inspection System
RUVIS

Inspects O-rings under 1 mm thick with high speed and accuracy
The system can inspect the top, bottom, inside and outside of O-rings at high speed.
Item Specifications
Inspection functions Applicable work O-rings
Tablet size 5–30 mm diameter
Note: If both inside and outside inspection is required, there are thickness limitations, so please inquire for each case.
Inspected items Size, dirt, scratches, chips, cracks, deformation, discoloration, etc.
Inspected surfaces Top, bottom, inside, outside Note: Inspection of top and bottom only is also possible.
Inspection accuracy As small as 8 μm
Processing capacity 5 mm dia.: 60,000 pieces/hour
12 mm dia.: 30,000 pieces/hour
30 mm dia.: 12,000 pieces/hour
Hardware Optical unit RGB light
Camera CMOS camera
Communication 21-inch monitor
Image processing unit Viswill image processing unit
Hopper Capacity: 9.5 L
Alignment unit Non vibration parts feeder
Conveyor units Glass turntable system
Sorting and rejection unit Pneumatic system
Conforming unit collection bin Capacity: 10 L
Defective or uninspected unit collection bin Capacity: 10 L
Software Inspection functions Individual and overall judgments, input of sensitivity, inspection condition setting, output of inspection results, inspection simulation function
Diagnostic functions Monitoring of inspection status, monitoring of hardware, self-diagnoses
Size and environment Size 1,500 mm (W) x 1,200 mm (D) x 1,800 mm (H)
Machine weight 500 kg
Power supply AC 200V (3 phase), 50/60 Hz
Power consumption 3.0 kW
Pneumatic pressure 0.5 MPa
Ambient conditions Temperature: 10–30 °C
Humidity: 30–70%
Exterior Bake coating
About Technologies About Technologies